The Source Rock and Fluids Atlas delivery and publication services provide up-to-date information on petroleum (organic) geochemical and geological data from Geoscience Australia's Organic Geochemistry Database (ORGCHEM). The sample data provides the spatial distribution of petroleum source rocks and their derived fluids (natural gas and crude oil) from boreholes and field sites in onshore and offshore Australian basins. The services provide characterisation of source rocks through the visualisation of Pyrolysis, Organic Petrology (Maceral Groups, Maceral Reflectance) and Organoclast Maturity data. The services also provide molecular and isotopic characterisation of source rocks and petroleum through the visualisation of Bulk, Whole Oil GC, Gas, Compound-Specific Isotopic Analyses (CSIA) and Gas Chromatography-Mass Spectrometry (GCMS) data tables. Interpretation of these data enables the characterisation of petroleum source rocks and identification of their derived petroleum fluids that comprise two key elements of petroleum systems analysis. The composition of petroleum determines whether or not it can be an economic commodity and if other processes (e.g. CO2 removal and sequestration; cryogenic liquefaction of LNG) are required for development.

This report represents the first output from a study designed to understand and identify residual oil zones in Australia, with the aim of developing this potential resource using CO2 –EOR techniques. This work is part of the Residual Oil Zone (ROZ) module in the Exploring For The Future (EFTF) programme, which runs from 2020-2024. The work presented here is a collaborative study between Geoscience Australia and CSIRO. ROZ potentially represent a new and viable oil resource for Australia, while at the same time providing an additional CO2 storage avenue through application of CO2 enhanced oil recovery (CO2-EOR). These water-saturated reservoirs, which contain a moderate amount of residual oil and resemble water-flooded conventional oil fields, can be associated with conventional fields (brownfields) or occur with no associated main pay zone (greenfields). Both types of ROZ are currently produced commercially through CO2-EOR in the Permian Basin, USA, and are of growing interest internationally, but our understanding of ROZ in the Australian context is lacking. The first section of this report identifies and discusses the key parameters and factors that influence the efficiency with which ROZ can be produced. These include fluid-rock and fluid-fluid interactions, which may affect injectivity and sweep of hydrocarbons. We also discuss the effects of reservoir heterogeneity as it relates to flow dynamics and also the effects of pore space configuration. The first section concludes with a discussion of CO2 storage associated with ROZ development. In the second section, we discuss two different injection strategies with which to develop ROZ; carbonated brine injection and water alternating gas injection. The final section outlines details of the workflow that will be applied in the EFTF ROZ module over the coming years. Our proposed workflow is a three pronged approach which involves core flooding experiments, pore scale modelling and petrophysical analysis to identify potential ROZ in key Australian basins. In addition to plain CO2 injection, two other promising EOR techniques namely CO2-WAG and carbonated brine injection are also considered in this workflow. The main objectives of this workflow are to: • assess and identifying estimated oil recovery potential from a target ROZ by either of three EOR injection strategies, • identify the best injection strategy for a ROZ • identify the CO2 storage and utilization potential

A large proportion of Australia’s onshore sedimentary basins remain exploration frontiers. Industry interest in these basins has recently increased due to the global and domestic energy demand, and the growth in unconventional hydrocarbon exploration. In 2016 and 2018, Geoscience Australia released an assessment of several central Australian basins that summarised the current status of geoscientific knowledge and petroleum exploration, and the key questions, for each basin. This publication provides a comprehensive assessment of the geology, petroleum systems, exploration status and data coverage for the Adavale Basin.

<div>The interpretation of AusAEM airborne electromagnetic (AEM) survey conductivity sections in the Canning Basin region delineates the geo-electrical features that correspond to major chronostratigraphic boundaries, and captures detailed stratigraphic information associated with these boundaries. This interpretation forms part of an assessment of the underground hydrogen storage potential of salt features in the Canning Basin region based on integration and interpretation of AEM and other geological and geophysical datasets. A main aim of this work was to interpret the AEM to develop a regional understanding of the near-surface stratigraphy and structural geology. This regional geological framework was complimented by the identification and assessment of possible near-surface salt-related structures, as underground salt bodies have been identified as potential underground hydrogen storage sites. This study interpreted over 20,000 line kilometres of 20&nbsp;km nominally line-spaced AusAEM conductivity sections, covering an area approximately 450,000 km2 to a depth of approximately 500&nbsp;m in northwest Western Australia. These conductivity sections were integrated and interpreted with other geological and geophysical datasets, such as boreholes, potential fields, surface and basement geology maps, and seismic interpretations. This interpretation produced approximately 110,000 depth estimate points or 4,000 3D line segments, each attributed with high-quality geometric, stratigraphic, and ancillary data. The depth estimate points are formatted for Geoscience Australia’s Estimates of Geological and Geophysical Surfaces database, the national repository for formatted depth estimate points. Despite these interpretations being collected to support exploration of salt features for hydrogen storage, they are also intended for use in a wide range of other disciplines, such as mineral, energy and groundwater resource exploration, environmental management, subsurface mapping, tectonic evolution studies, and cover thickness, prospectivity, and economic modelling. Therefore, these interpretations will benefit government, industry and academia interested in the geology of the Canning Basin region.</div>

<div>Australia’s Energy Commodity Resources (AECR) provides estimates of Australia’s energy commodity reserves, resources, and production as at the end of 2021. The 2023 edition of AECR also includes previously unpublished energy commodity resource estimates data compiled by Geoscience Australia for the 2021 reporting period. The AECR energy commodity resource estimates are based primarily on published open file data and aggregated (de identified) confidential data. The assessment provides a baseline for the production and remaining recoverable resources of gas, oil, coal, uranium and thorium in Australia, and the global significance of our nation’s energy commodity resources.</div>

The preserved successions from the Mesoproterozoic Era (1600 to 1000 Ma) are a relatively understudied part of Australian geological evolution, especially considering that this era has a greater time span than the entire Phanerozoic. These rocks are mostly known in variably-preserved sedimentary basins overlying Paleoproterozoic or Archean cratons or at the margins of these cratons. Some metamorphosed equivalents occur within the orogens between or marginal to these cratons. Both energy and mineral resources are hosted in Australian Mesoproterozoic basins, including the highly-prospective organic rich shale units within the Beetaloo Sub-basin (Northern Territory), which form part of the Beetaloo Petroleum Supersystem. The primary aim for this record is to provide a consolidated state of knowledge of Australian basins or successions similar in age to that of the Mesoproterozoic Beetaloo Petroleum Supersystem. The findings of this report will assist prioritising future work, through improved geological understanding and resource prospectivity. This report presents an overview of 14 Mesoproterozoic-age sedimentary basins or successions and their current level of understanding, including location, basin architecture, stratigraphy and depositional environments, age constraints and mineral and energy resources. Basins or successions included in this record are unmetamorphosed or metamorphosed to very low-grade conditions. Recommendations are made for future work to address the main knowledge gaps identified from this review. While some of these basins have been the focus of recent intense study and data acquisition, the extent of knowledge varies broadly across basins. All basins reviewed in this record would benefit from further geochemical and geochronological analyses, and stratigraphic study to better understand the timing of depositional events and their correlation with nearby basins. Elucidation of the post-depositional history of alteration, migration of fluids and/or hydrocarbons would facilitate future exploration and resource evaluation.

All commercially produced hydrogen worldwide is presently stored in salt caverns. Through the Exploring for the Future program, Geoscience Australia is identifying and mapping salt deposits in Australia that may be suitable for hydrogen storage. The only known thick salt accumulations in eastern Australia are found in the Boree Salt of the Adavale Basin in central Queensland, and represent potentially strategic assets for underground hydrogen storage. The Boree Salt consists predominantly of halite that is up to 555 m thick in some wells. In 2021, Geoscience Australia contracted Intrepid Geophysics to develop a 3D geological model of the Adavale Basin, using well data and 2D seismic interpretation and focussing on the Boree Salt deposit. The 3D model has identified three main salt bodies that may be suitable for salt cavern construction and hydrogen storage. Further work and data acquisition are required to fully assess the suitability of these salt bodies for hydrogen storage. Disclaimer Geoscience Australia has tried to make the information in this product as accurate as possible. However, it does not guarantee that the information is totally accurate or complete. Therefore, you should not solely rely on this information when making a commercial decision. This dataset is published with the permission of the CEO, Geoscience Australia.

<div>In Australia, wide-spread sedimentary basin and regolith cover presents a key challenge to explorers, environmental managers and decision-makers, as it obscures underlying rocks of interest. To address this, a national coverage of airborne electromagnetics (AEM) with a 20&nbsp;km line-spacing is being acquired. This survey is acquired as part of the Exploring for the Future program and in collaboration with state and territory geological surveys. This survey presents an opportunity for regional geological interpretations on the modelled AEM data, helping constrain the characteristics of the near-surface geology beneath the abundant cover, to a depth of up to ~500&nbsp;m.</div><div> The AEM conductivity sections were used to delineate key chronostratigraphic boundaries, e.g. the bases of geological eras, and provide a first-pass interpretation of the subsurface geology. The interpretation was conducted with a high level of data integration with boreholes, potential fields geophysics, seismic, surface geology maps and solid geology maps. This approach led to the construction of well-informed geological interpretations and provided a platform for ongoing quality assurance and quality control of the interpretations and supporting datasets. These interpretations are delivered across various platforms in multidimensional non-proprietary open formats, and have been formatted for direct upload to Geoscience Australia’s (GA) Estimates of Geological and Geophysical Surfaces (EGGS) database, the national repository of multidisciplinary subsurface depth estimates.</div><div> These interpretations have resulted in significant advancements in our understanding of Australia’s near-surface geoscience, by revealing valuable information about the thickness and composition of the extensive cover, as well as the composition, structure and distribution of underlying rocks. Current interpretation coverage is ~110,000 line kilometres of AEM conductivity sections, or an area &gt;2,000,000&nbsp;km2, similar to the area of Greenland or Saudi Arabia. This ongoing work has led to the production of almost 600,000 depth estimate points, each attributed with interpretation-specific metadata. Three-dimensional line work and over 300,000 points are currently available for visualisation, integration and download through the GA Portal, or for download through GA’s eCat electronic catalogue. </div><div> These interpretations demonstrate the benefits of acquiring broadly-spaced AEM surveys. Interpretations derived from these surveys are important in supporting regional environmental management, resource exploration, hazard mapping, and stratigraphic unit certainty quantification. Delivered as precompetitive data, these interpretations provide users in academia, government and industry with a multidisciplinary tool for a wide range of investigations, and as a basis for further geoscientific studies.</div> Abstract submitted and presented at 2023 Australian Earth Science Convention (AESC), Perth WA (https://2023.aegc.com.au/)

<div>The Carpentaria Basin is a Mesozoic basin located in the northernmost part of Australia and is centered around the Gulf of Carpentaria . It forms part of the Great Australian Superbasin that includes the Eromanga, Surat, Nambour and Clarence-Morton basins to the south, the Laura Basin, to the east, and the Papuan Basin to the north. In a west-east direction it extends for about 1250 km from the area of Katherine in the Northern Territory to the Great Dividing Range in Queensland. A small portion of the basin reaches the east coast of Queensland in the Olive River region. In a north-south direction it extends for over 1000 km from Cape York to Cloncurry, in Queensland. The basin has a total area of over 750,000 km2, comparable in size to the state of New South Wales. From a geographic standpoint the sediments of the Carpentaria Basin occur in three areas: offshore below the Gulf of Carpentaria, onshore to the west in the Northern Territory, and onshore to the east in Queensland. This report focuses on the geology and energy resource potential of the onshore areas of the basin but, to provide a broader understanding of the basin evolution there is, of necessity, some discussion of the geology offshore.</div><div><br></div>

<div>Geoscience Australia’s Onshore Basin Inventories project delivers a single point of reference and creates a standardised national basin inventory that provides a whole-of-basin catalogue of geology, petroleum systems, exploration status and data coverage of hydrocarbon-prone onshore Australian sedimentary basins. In addition to summarising the current state of knowledge within each basin, the onshore basin inventory reports identify critical science questions and key exploration uncertainties that may help inform future work program planning and decision making for both government and industry. Volume 1 of the inventory covers the McArthur, South Nicholson, Georgina, Wiso, Amadeus, Warburton, Cooper and Galilee basins and Volume 2 expands this list to include the Officer, Perth and onshore Canning basins. Under Geoscience Australia’s Exploring for the Future (EFTF) program, several new onshore basin inventory reports are being delivered. Upcoming releases include the Adavale Basin of southern Queensland, and a compilation report addressing Australia’s poorly understood Mesoproterozoic basins. These are supported by value-add products that address identified data gaps and evolve regional understanding of basin evolution and prospectivity, including petroleum systems modelling, seismic reprocessing and regional geochemical studies. The Onshore Basin Inventories project continues to provide scientific and strategic direction for pre-competitive data acquisition under the EFTF work program, guiding program planning and shaping post-acquisition analysis programs.</div>